Latest News, Tips & More | Point Auto

Don't Get Fooled! Debunking Common Car Myths

While pranks and laughter are the order of the day, the world of cars isn't immune to its share of myths and misconceptions. Today, we'll separate fact from fiction and debunk some common car myths that might have you fooled.

Myth #1: Turning off your car at a red light saves gas.

Fact: Modern cars with fuel injection systems actually use slightly more gas when restarting compared to idling for short periods. However, excessive idling (over 2 minutes) is still wasteful and should be avoided.

Myth #2: You can roll down your windows to cool down your car faster than using the AC.

Fact: While it might seem logical, rolling down windows creates drag, reducing fuel efficiency and slowing down the cooling process. Using your air conditioning, especially on high for a few minutes, is actually faster and more efficient.

Myth #3: Putting a potato in your tailpipe will muffle your exhaust sound.

Fact: Not only is this incredibly dangerous (it can block exhaust fumes and cause carbon monoxide poisoning), it's also completely ineffective. Modifying your exhaust system for sound is illegal in most areas and can damage your car.

Myth #4: Premium gas gives your car more horsepower.

Fact: In most cases, premium gas is not necessary for everyday driving. It's designed for high-performance engines that require higher octane ratings. Using premium gas in a car designed for regular gas won't provide any additional benefits.

Myth #5: A clean car is more fuel-efficient.

Fact: A dirty car with excessive drag (like mud or grime) can slightly decrease fuel efficiency. However, regular car washes won't significantly impact your gas mileage.

Myth #6: You should warm up your car before driving on cold days.

Fact: Modern fuel-injected engines are designed to warm up quickly while driving. Idling for long periods is unnecessary and can waste gas and contribute to pollution. It's better to start your car and drive gently for a few minutes until it reaches operating temperature.

Myth #8: All transmission fluids are the same.

Fact: Different car models require specific transmission fluids. Using the wrong type of fluid can damage your transmission. Always consult your owner's manual or a qualified mechanic for the correct transmission fluid for your car.

Myth #9: Filling your gas tank in the morning gets you more gas.

Fact: Gas is stored underground in tanks with consistent temperatures, regardless of the time of day. The pump dispenses gas at the same density no matter when you fill up.

So, there you have it! Hopefully, this article has helped clear up some common car myths and ensure you're taking proper care of your vehicle. Remember, when it comes to car advice, always consult your owner's manual or a trusted mechanic for accurate information. Happy April Fools' Day, and drive safe!

.

How Low Will You Let It Go?
In the world of cars, there's a risky dance we all play it's called the Fuel Level Limbo. How low can you go with your fuel gauge before your car decides it's had enough of your shenanigans?;

The Sediment Shuffle: Dancing with Dirt

First up in our limbo line is the sediment shuffle. You see, your fuel tank isn't a pristine oasis. It's more like a mini desert, complete with its own set of buried treasures, sediment and gunk. Go too low on fuel, and your car starts picking up this dance floor debris, leading to a not-so-funky clog in your fuel system.

The Pump Plunge: A Drying Dilemma

The fuel pump loves a good swim. But in the Fuel level limbo, it's like being at a pool party with no water. Running on low fuel means the pump gets no cooling or lubrication, think of it as trying to dance in quicksand. Spoiler alert: it doesn't end well for the pump

The Gauge Guessing Game: Fuel Forecasting Fiascos

Ever play the guessing game with your fuel gauge? Trying to predict exactly how many miles you can push before your car sputters to a stop is like trying to forecast the weather with a magic 8-ball. Spoiler, Outlook not so good

Stranded Salsa: The No-Gas Tango

There's nothing like the dance of desperation when you're stranded on the side of the road. It's a unique mix of the regret-rumba and the frustration-flamenco. Trust me, roadside assistance doesn't appreciate impromptu dance performances

The Wallet Waltz: Fuel Efficiency and Your Finances

Dancing on the edge of an empty tank isn't just risky; it's also a waltz with your wallet. Consistently running low can mean more trips to the mechanic, and those visits can have more zeroes on the bill than you'd like.

Keeping the Tank Tango at Bay

So, what's the moral of our Fuel Level Limbo story? Keep that fuel dance above the danger line. It's cheaper, safer, and far less embarrassing than doing the roadside stranded salsa. Happy driving, and may your fuel gauge always be a limbo stick that's set just right!

The Safe Way to Defog Your Windshield

Driving with a clear view is not just a matter of convenience; it's a critical safety necessity. A fogged-up windshield can transform an ordinary drive into a perilous endeavor, significantly increasing the risk of accidents. When visibility drops, so does your ability to respond to road conditions and hazards.

We'll dive into the science behind windshield fog and offer practical, safety-first techniques to ensure you maintain the clearest view possible. Whether you're facing the early morning chill or the humid evening return from work, understanding how to quickly and safely defog your windshield is key to a safe journey. Let's clear things up.

Understanding Windshield Fog

Why Windshields Fog Up:
Imagine your vehicle as a contained climate system. The warm air, cozy from your car’s heating system or simply from passengers, confronts the cold surface of the glass and rapidly cools down, shedding its moisture as condensation. This process results in a fine mist of droplets clinging to the inside of your windshield, scattering light and obscuring your view.

Understanding the Risks:
Compromised visibility due to fogged glass is a serious safety hazard. Inadequate visibility means you are less likely to notice pedestrians, other vehicles, and road signs in time to react appropriately. It's essential for the safety of yourself and others to maintain a clear windshield and ensure full visibility at all times.

Preventative Measures

Anticipating fog before it happens can help you maintain a clear windshield and improve safety. Here are some measures to prevent your windshield from fogging:

Ventilate Your Vehicle:
To prevent condensation, it’s beneficial to allow the interior of your car to ventilate, especially overnight. Leaving your windows slightly open can balance the inside and outside temperatures, reducing the likelihood of fog formation.

Regular Maintenance Checks:

• Cabin Air Filters: Keep your cabin air filters clean to ensure adequate airflow, which is vital for effective defogging.

• HVAC System: Regular checks on your heating, ventilation, and air conditioning system can help prevent fogging by ensuring it operates efficiently.

Pre-emptive Climate Control:
Before exiting your vehicle, switch to fresh air mode to expel moist air and cool the interior, reducing the chance of fogging when the vehicle is next used.

Defogging Techniques for Safety

When faced with a fogged windshield, you need to act fast, but always with safety in mind. Here’s what to do:

1. Start Your Engine: Before driving, start your car and begin the defrost cycle to enhance visibility.

2. Use the Defroster: Engage the defroster to warm the windshield and evaporate condensation.

3. Adjust the Airflow: Direct vents towards the windshield and side windows to disperse the fog.

4. Temperature Settings: Adjust the temperature to match the exterior conditions—warm to counteract cold, cool for warmth.

5. Activate the A/C: Use the air conditioning to dehumidify the cabin and clear the fog faster.

6. Turn Off Recirculation: Switch off the recirculation to allow dry outside air to enter the vehicle.

Safety Tips While Defogging:

• Do Not Drive Blindly: Ensure at least partial visibility before starting to drive and pull over if visibility is impaired while driving.

• Use Wipers: Utilize your windshield wipers to clear external condensation.

• Window Cracking Technique: Slightly open windows to balance the internal and external climate, aiding the defogging process.

• Manual Wiping: If necessary, use a clean microfiber cloth to manually clear the fog.

• Regular Cleaning: Maintain a clean windshield to prevent excessive fogging.

Remember, arriving safely is more important than arriving on time. It's better to delay your trip momentarily than to drive with obscured visibility.

Choosing the Right Products

Using the appropriate products is crucial for effective defogging and safety. Here are some recommendations:

• Anti-Fog Solutions: Opt for automotive-specific products like Stoner Invisible Glass Anti-Fog or Rain-X Anti-Fog, which prevent moisture build-up on the glass.

• Cleaning Solutions: Use automotive glass cleaners designed for vehicle interiors that do not leave residues.

• Cloths and Tools: Employ microfiber cloths for their lint-free and streak-free properties, and keep a squeegee handy for quick moisture removal.

Safety Considerations:

• Test products on a small area of the glass to ensure they do not obstruct visibility.

• Confirm that the products used do not interfere with windshield sensors or cameras, especially in vehicles with ADAS.

Be proactive in maintaining your vehicle's defogging capabilities. Keep the necessary tools on hand, regularly check your car's systems, and pull over if your visibility is compromised. Remember, safe driving is not just about reacting to conditions; it's about being prepared for them. Drive safely, stay visible, and enjoy the clarity of your journey.

How To Safely Remove Ice and Snow From Your Car

Winter can bring a variety of problems with your car – from icy windshields to frozen lock mechanisms. But one of the most common winter car troubles is having to clear away ice and snow, which can quickly become an annoying and potentially dangerous job. To make things easier we’ll provide you with some simple tips and tricks for safely removing ice and snow from your car.

Check Your Car’s Temperature

The first step in safely removing ice and snow is to make sure that your car is at the right temperature. Generally speaking, you don’t want the engine to be too hot or too cold; if it is too cold, any sudden change in heat could cause glass (including the windshield) to crack or shatter. So be sure to start your car up and let it sit idle until its temperature reaches a comfortable “warm-to-the-touch” level before attempting any removal attempts.

Start With The Windows

Once you have an acceptable temperature inside your car, it’s time to start removing that pesky layer of ice and snow! The best place to start is with the windows; this will allow you maximum visibility when driving once everything has been cleared away. Begin by scraping off any snow or ice build up on the exterior of each window using either a plastic or rubber scraper or even a credit card; then move on to clearing away frosty condensation from inside (for this, a cloth should do). Once you have removed as much as possible, turn on your defroster until all glass is completely cleared away. 

Use A Deicing Agent

If scraping alone doesn’t seem to cut it – especially if you are dealing with thick layers of frozen water – consider using a deicing agent like rock salt or even diluted rubbing alcohol (make sure not to use straight rubbing alcohol as this could damage paint jobs). Sprinkle these substances onto the problem areas on both the outside and inside of your windows (just remember not to get any of these agents on any part of your vehicle’s interior). Let it sit for a few minutes before attempting another scrape – this should help break up large chunks of ice into smaller pieces that can be more easily removed. 

Finish With A Cleaning Wipe Down

Once all visible snow/ice has been removed from both exterior AND interior surfaces, give everything one final wipe down using paper towel or newspaper – just make sure whatever material you are using does not contain any dyes/inks that could stain fabric surfaces like dashboard coverings or floor mats! This will ensure no dust remnants remain after completion and prevent interior surfaces from becoming wet due to any residual moisture. By following the simple steps outlined above, you can make short work of removing snow and ice from your car.

Your Brakes Are Telling You Something!

Brakes are an essential part of every car, helping you to slow down and stop when needed. Generally, if your brakes are making a high-pitched squealing noise when you first step on them, it's an indication that the brake pads need to be replaced.

What causes that noise when you brake?

This can be due to a number of different factors - worn or dirty brake pads, issues with the rotors or calipers, or even something as simple as dirt or debris caught in the brakes.

If you're noticing a strange noise coming from your brakes, it's always best to have them checked out by a professional mechanic to ensure there isn't a bigger issue at play.

What are the different types of brakes, and how do they work?

There are many different types of brakes, each designed to perform a specific function and work in a particular way. Some common brake types include disc brakes, drum brakes, and vacuum brakes.

Disc brakes use a system of pads that press against a spinning metal disc to slow or stop the vehicle. Drum brakes consist of two brake shoes that press against the inside of a stationary metal drum. Vacuum brakes use suction to slow or stop a vehicle, drawing air from the atmosphere into chambers

How can you tell if your brakes need to be serviced or replaced?

If your car is making a noise when you brake, there's a good chance that something is wrong with your brakes. There are several things you can do to check your brakes and see if they need to be serviced or replaced.

Another way to tell if your brakes are in need of service is to look at your brake fluid levels. If the fluid is low or dark, it could be a sign that your brakes need to be flushed and refilled.

What does turning the Rotors mean?

If you've ever had your car's brakes serviced, you may have heard the term "turning the rotors." But what does that actually mean?

Rotors are the metal discs that your brake pads press against to slow or stop your car. When they become worn or dirty, they can cause a number of problems with braking performance. Turning the rotors means machining them down so that they are smooth and clean again, allowing for better braking. If they get worn down below a certain point, they will need to be replaced entirely by a mechanic.

As a driver, it's important to be aware of any issues with your car's brakes, as this can have serious implications for your safety on the road. Some common symptoms of worn or faulty brakes include a high-pitched squealing noise when braking, low or dark brake fluid levels, vibrations or shuddering when applying the brakes, and poor response time. If you notice any of these issues, be sure to have your brakes checked by a professional mechanic as soon as possible.